Sebastian Zetterström, Master of Science in energy systems, Mälardalens University in Västerås. Abstract of Master’s thesis, submitted 16th of August. Evaluation of a suction pyrometer by heat and mass transfer methods. The aim of the thesis is to evaluate the cooling of a specific suction pyrometer which is designed by Jan Skvaril, doctorate at Mälardalens University. First part is explained how the balances and correlations are performed before being implemented in MATLAB, after this a ANSYS Fluent model is constructed and explained, which is used for the comparison of results. The cooling is performed by using water at an inlet temperature of 10°C and an assumed flue gas temperature of 810°C. Sensitivity analysis are performed to test the stability of the models which yield good results for stability, done by adjusting both flue gas temperature and inlet cooling water temperature which are as well presented for observation. From doing further MATLAB sensitivity analysis which show that the model still performs well and is stable. The resulting cooling water is heated to approximately 24, 8°C and the flue gas is cooled to 22, 4°C, in ANSYS Fluent the answer differs approximately 2°C and results in 20, 4°C which can be considered by looking at the flue gas inlet temperature of 810°C that this can be deemed an insignificant change and can therefore conclude that the comparison between the two platforms match each other good and that calculations can be considered accurate. Keywords: Suction pyrometer, cooling, heat transfer, thermal resistance network, MATLAB, ANSYS Fluent, simulation
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-36450 |
| Date | January 2017 |
| Creators | Zetterström, Sebastian |
| Publisher | Mälardalens högskola, Akademin för ekonomi, samhälle och teknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds