This doctoral thesis deals with EMC pre-compliance testing of radiated disturbance. The thesis summarizes present pieces of knowledge about restricting of disturbing ambient signals and focuses on restricting of test site imperfection influence on the measurement results. Pre-compliance test site “calibration” uses comparison signal sources. There were added up the recommendations for “calibration” steps, too. The semi-anechoic vs. fully-anechoic chambers measurements results were compared. Some methods for dealing with ambient disturbing signals were discussed and high attention was applied to the test site choice and the minimal dimension geometry was recommended. There are presented recommendations for pre-compliance radiated disturbance measurements in the conclusion with the stress on available test equipment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233518 |
| Date | January 2010 |
| Creators | Vídenka, Rostislav |
| Contributors | Soldán, Josef, Mazánek, Miloš, Dřínovský, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds