This thesis investigates inkjet-printed flexible antennas fabricated on paper substrates as a system-level solution for ultra-low-cost and mass production of RF structures. These modules are designed for the UHF Radio Frequency Identification (RFID) Tags and Wireless Sensor Nodes (WSN); however the approach could be easily extended to other microwave and wireless applications.
Chapter 1 serves as an introduction to RFID technology and its capabilities while listing the major challenges that could potentially hinder RFID practical implementation.
Chapter 2 discusses the benefits of using paper as a substrate for high-frequency applications, reporting its very good electrical/dielectric performance up to at least 1 GHz. The dielectric properties are studied by using the microstrip ring resonator. Brief discussion on Liquid Crystal Polymer (LCP) is also given in this chapter.
Chapter 3 gives details about the inkjet printing technology, including the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic (e.g.LCP) or paper-based substrates.
Chapter 4 focuses on antenna designs. Four examples are given to provide: i) matching techniques to complex IC impedance, ii) proof of concept of inkjet printing on paper substrate through measurement results, iii) demonstration of a fully-integrated wireless sensor modules on paper and show a 2D sensor integration with an RFID tag module on paper.
Chapter 5 concludes the thesis by explaining the importance of this work in creating a first step towards an environmentally friendly generation of "green" RF electronics and modules.
Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/28083 |
Date | 31 March 2009 |
Creators | Rida, Amin H. |
Publisher | Georgia Institute of Technology |
Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
Detected Language | English |
Type | Thesis |
Page generated in 0.0014 seconds