Dissertation thesis is focused on development, design and production of the new milling cutter which is used for roughing operations. High-speed steels, coating technology and milling technology are described in first chapters of dissertation thesis. The main part of this thesis is the design of the new milling cutter that has been designed on the basis of the machining simulation. The milling cutter is designed as a three-flute cylindrical end mill made of high speed steel. The each flute is composed of two special compensation edges. The compensation edges are used for reducing (at best suppression) tensile stress in the heel of the tooth. The milling cutter was made by lost wax technology, followed by grinding and thermal treatment. New designed tools were deposited by PVD coatings (e.g. (Al,Ti)N). Standard catalog milling cutters (producer ZPS - milling tools, Zlín, Czech Republic) were used for comparison the designed milling cutter. Carbon steel CSN 41 2050 (DIN 1.1191) was used for milling, which was carried out with using process liquid. The monitored parameters were force loading, flank wear and tensile stress during milling. The dynamometer Kistler was used for measuring force loading and data obtained during machining was used for stress analysis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234250 |
| Date | January 2015 |
| Creators | Jaroš, Aleš |
| Contributors | Janáč, Alexander, Chladil, Josef, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds