This thesis describes a new concept, applicable to high-power current-sourced conversion (CSC), where a controllable firing-angle shift is introduced between series and parallel converters to enable independent active and reactive power control. The firing-shift concept solves a difficult problem, by giving thyristor based CSCs the control flexibility of pulse-width modulated (PWM) converters, but without a loss in efficiency or rating. Several configurations are developed, based on the firing-shift concept, and provide flexible, efficient solutions for both very high power HVDC transmission, and very high current industrial processes.
HVDC transmission configurations are first developed for 4-quadrant high-pulse operation, based on the series connected multi-level current reinjection (MLCR) topology. Independent reactive power control between two ends of an HVDC link are proven under firing-shift control, with high-pulse operation, and without on-load tap changing (OLTC) transformers. This is followed by application of firing-shift control to a bi-directional back-to-back HVDC link connecting two weak systems to highlight the added dc voltage control flexibility of the concept.
The fault recovery capability of an MLCR based ultra-HVDC (UHVDC) long distance transmis-sion scheme is also proven under firing-shift control. The scheme responds favourably to both ac disturbances and hard dc faults, without the risk of commutation failures and instability experienced during fault recovery of line-commutated conversion.
The two-quadrant capability of very high current rectification is also proven with configurations based on phase-shifted 12-pulse and MLCR parallel CSCs. The elimination of the electro-mechanical OLTC/satruable reactor voltage control, the high-current CSC’s biggest shortcoming, greatly improves controllability and with firing-shift control, ensures high power-factor for all load conditions. This reduces the reactive power demands on the transmission system, which results in more efficient power delivery
| Identifer | oai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/2610 |
| Date | January 2008 |
| Creators | Murray, Nicholas John |
| Publisher | University of Canterbury. Electrical and Computer Engineering |
| Source Sets | University of Canterbury |
| Language | English |
| Detected Language | English |
| Type | Text, Electronic thesis or dissertation |
| Rights | Copyright Nicholas John Murray, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
| Relation | NZCU |
Page generated in 0.0017 seconds