This project has been proposed by the UCT Knowledge Partnership Project. This institution is aimed at providing assistance to under-privileged communities in the Western Cape. A pre-school fence material which is low cost is to be investigated. The following criterions were set to be met for the material: -The material is to have no fuel usage value such as wood, which can be burnt for space heating -The material is to have no scrap metal value such as steel and wire fencing material as this easily gets stolen. -The material is not to block visibility which harbors criminal activity in the area. Fences such as concrete slabs and brick block visibility. The materials considered in this project are: -Various plastic polymer materials -Plastic Lumber composite material -Recycled Plastic -Rubber reinforced concrete Plastic lumber and recycled plastic HDPE were considered for use in the fence material. After considering the available fence components and loading on the fence, 100 x 100 mm cross section plastic lumber and recycled plastic section were chosen to be used. The fence design was based on existing patents which were modified. A design showing the meter of the fence was designed and is shown in the document.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/2676 |
Date | 07 1900 |
Creators | Mazwai, Konke |
Publisher | University of Cape Town, Faculty of Engineering and the Built Environment, Department of Mechanical Engineering |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Rights | Attribution-NonCommercial-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-nc-sa/4.0/, Knowledge Co-op |
Relation | Knowledge Co-op project #4. Low-cost fence |
Page generated in 0.0021 seconds