This thesis deals with optimization of a press line part for the manufacture of reflectors present at the Automotive Lighting Company, Jihlava. The first part focuses on describing the current workplace layout of the press line. The workplaces are located inconveniently and thus require a larger number of operators and a considerable amount of manual work. The second part of the thesis proposes layout solutions for the injection presses and for other machine parts. At the same time, a smoother transition design is proposed for the press line and for the manufacturing section that follows. Based on an evaluation of selected criteria, the optimum version is chosen, thereby adding to the efficiency of the molding process by reducing the number of operators required, by lowering the proportion of manual work relative to other activities, and by limiting the risk of poor quality. The conclusion of the thesis sums up the necessary investment costs and offers an economic assessment of introducing the selected press line arrangement to operation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230428 |
| Date | January 2012 |
| Creators | Šťastný, Michal |
| Contributors | Hrbáček, Jan, Kubík, Roman |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds