Consuming two major greenhouse gases, carbon dioxide (CO2) and methane (CH4), to produce synthesis gas, which is a mixture of carbon monoxide (CO) and hydrogen (H2), CO2 reforming of CH4 shows significant environmental and economic benefits. However, the process has not found wide industrial application due to severe catalyst deactivation, basically caused by carbon formation. Therefore, it is of great interest to develop stable catalysts without severe deactivation. This work is primarily focused on the development of novel nickel-based catalysts to achieve stable operation for CO2 reforming of CH4.<p>
Following Dowdens strategy of catalyst design, a series of nickel-based catalysts are designed with a general formula: Ni-Me/AlMgOx (Me = Co, Cu, Fe, or Mn). The designed catalysts are prepared using co-precipitation method and tested for CO2 reforming of CH4. Catalyst screening showed that the Ni-Co/AlMgOx catalyst has superior performance in terms of activity and stability to other Ni-Me/AlMgOx (Me = Cu, Fe, or Mn) catalysts. A 2000 h long-term deactivation test has shown that the Ni-Co/AlMgOx has high activity and excellent stability for CO2 reforming of CH4.<p>
Further investigation on the Ni-Co/AlMgOx catalysts shows that adjusting Ni/Co ratio and Ni-Co loading can significantly affect the catalyst performance. Carbon free operation for CO2 reforming of CH4 can be achieved on the catalysts with a Ni/Co close to 1 and Ni-Co overall loading between 4-10 %. In addition, calcination temperature shows important impacts on the performance of Ni-Co/AlMgOx catalysts. A calcination temperature range of 700-900 oC is recommended.<p>
The Ni-Co/AlMgOx catalysts are characterized using various techniques such as ICP-MS, BET, CO-chemiosorption, XRD, TPR, TG/DTA, TEM, and XPS. It has been found that the high activity and excellent stability of Ni-Co/AlMgOx catalysts can be ascribed to its high surface area, high metal disperation, small particle size, strong metal-support interaction, and synergy between Ni and Co.<p>
Kinetic studies have shown that the CH4 decomposition and CO2 activation could be the rate-determining steps. Both Power-Law and Langmuir-Hinshelwood kinetic models can fit the experiment data with satisfactory results.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-02282009-015118 |
| Date | 09 March 2009 |
| Creators | Zhang, Jianguo |
| Contributors | Peng, Ding-Yu, Nemati, Mehdi, Hayes, R., Evitts, Richard W., Dalai, Ajay K., Urquhart, Stephen G., Wang, Hui |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-02282009-015118/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0018 seconds