Massive volumes of hazardous emissions have been produced by the construction sector for which some adequate steps are implemented, but the rising trend of emissions can still be seen. In this thesis, the goal is to identify and analyze renovation measures from primary energy use and environmental impacts perspective, according to Boverket’s mandatory provisions and general recommendations (BBR 2018), for an old school building. Also, as a part of the study goal, the building structure is analyzed under the updated Eurocode SS-EN 90-91-96 in order to see if the building meets structural stability requirements. Life cycle assessment of the building is limited to production and construction stages, and it is used as a tool to evaluate the environmental impacts according to standard SS-EN 15978:2011. Most of the relevant data are provided by VÖFAB, in cooperation with Växjö municipality, as well as the company WSP group. The object of the thesis is an old three-story school building constructed in 1950 in Växjö, Sweden. The gross area of the building is 1,300 m2 and for renovation scenarios, building envelope components are investigated by adding new insulation materials considering two life cycle stages. In the production phase, the lowest primary energy use was 137 kWh/m2 for the scenario of using cellulose insulation material plus windows and exterior doors with a U-value of 1.1 [W/m2 K]. The lowest environmental impacts were also obtained for this scenario, with 14 kg CO2-eq/m2 global warming potential (GWP), 0.06 kg SO2-eq/m2 acidification potential (AP), and 0.06 kg NO3-eq/m2 eutrophication potential (EP). The results indicate that the share of the installation step in the primary energy use and environmental impacts during the construction phase is negligible, but the transportation role in this stage is significant. The highest global warming potential is for the scenario using cellulose insulation material plus windows and exterior doors with a U-value of 0.7 [W/m2 K] with 4.4 kg CO2-eq/m2 in the construction stage. Ultimately, the material production stage accounts for the most share of primary energy use and environmental impacts. This research provides several renovation measures investigated by life cycle assessment resulting in performing climate declarations. Regarding the sensitivity analysis, the electricity source has a considerable effect on reducing total primary energy consumption and environmental impacts during the production phase. It is also found that the scenario utilizing cellulose insulation material with windows with a U-value of 1.1 [W/m2 K] shows the lowest total primary energy use and environmental impacts. Through analyzing the building structure, all Eurocode criteria within the serviceability limit state (SLS) and ultimate limit state (ULS) are fulfilled, and the structure is still stable when new materials are added through renovation.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:lnu-115580 |
| Date | January 2022 |
| Creators | Ahaki Lakeh, Amir, Tahmasbi, Milad |
| Publisher | Linnéuniversitetet, Institutionen för byggteknik (BY) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds