In this study, the effectiveness of hole-drilling strain gage method on residual stress estimation is investigated. The thermal-elastic-plastic model of commercial Marc finite element method package is employed to simulate and build up the hole-drilling process and residual stress distribute. Two Inconel 690 alloy plate welded with GTAW filling I-52 solder has simulated by using the Marc software first. Then the traditional hole-drilling process is simulated. The simulated residual strain variation data is introduced into the hole-drilling strain-gage method to derive the possible residual stress components. The effects of drilling depth and drill size on the accuracy of estimated residual stress have also been discussed.
A comparison between stress components estimated from the traditional hole-drilling strain gage method and simulated from the Marc software was presented. The modified dimensionless parameters are provided by applying the optimum technique. The numerical results indicate that the proposed dimensionless parameters can improve the accuracy of estimated residual stress components significantly.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0719110-215437 |
Date | 19 July 2010 |
Creators | Su, Pin-shen |
Contributors | Der-min Tsai, Yung-chuan Chen, Shyh-chour Huang, Ying-chine Tsai, Jao-hwa Kuang |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0719110-215437 |
Rights | unrestricted, Copyright information available at source archive |
Page generated in 0.0008 seconds