The main objective of this work was to design a suitable composition of a protective coatings, made of several different layers of specific materials - with respect to residual stress, induced due to a mismatch in thermal expansion coefficients of each layer. Protective coating in this work means both the thermal and the environmental barrier. These coatings protect components against high temperatures and harsh environment. In this work, necessary theoretical background in the field of the thermal and environmental barrier coatings is introduced. There are mentioned some basic design approaches, commonly used materials and processing methods for the coating structure. The literature review gives an overview of modeling of such coated structures, in particular it is devoted to the thermal barrier coatings deposited by air plasma spray process. The next chapter closely describes classical laminate theory used for calculation of residual stresses in the coating. One of the assumptions of this theory is homogenous temperature field through the coating’s thickness. However, in this work was revealed a way to extend the classical lamination theory of such cases, in which the temperatures vary along the thickness of the coating. In the practical part, the analytical model was used for designing suitable properties of some coatings, which were consists of two, three and four layers. The calculations were performed both for constant temperature and for the temperature gradient. All results obtained from analytical approach were verified by numerical calculations.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318659 |
Date | January 2017 |
Creators | Dohnalík, Petr |
Contributors | Hrstka, Miroslav, Ševeček, Oldřich |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds