In this thesis structural optimization of castings and thermomechanical analysis of castings are studied. In paper I an optimization algorithm is created by using Matlab. The algorithm is linked to the commercial FE solver Abaqus by using Python script. The optimization algorithm uses the successive response surfaces methodology (SRSM) to create global response surfaces. It is shown that including residual stresses in structural optimization of castings yields an optimal shape that differs significantly from the one obtained when residual stresses are excluded. In paper II the optimization algorithm is expanded to using neural networks. It is tested on some typical bench mark problems and shows very promising results. Combining paper I and II the response surfaces can be either analytical functions, both linear and non-linear, or neural networks. The optimization is then performed by using sequential linear programming or by using a zero-order method called Complex. This is all gathered in a package called StuG-OPT. In paper III and IV focus is on the thermomechanical problem when residual stresses are calculated. In paper III a literature review is performed and some numerical simulations are performed to see where numerical simulations can be used in the industry today. In paper IV simulations are compared to real tests. Several stress lattices are casted and the residual stresses are measured. Simulations are performed by using Magmasoft and Abaqus. In Magmasoft a J2-plasticity model is used and in Abaqus two simulations are performed using either J2-plasticity or the ”Cast Iron Plasticity” available in Abaqus that takes into account the different behavior in tension and compression for grey cast iron. / <p>Report code: LIU-TEK-LIC-2007:34.</p>
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-10192 |
| Date | January 2007 |
| Creators | Gustafsson, Erik |
| Publisher | Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, Institutionen för ekonomisk och industriell utveckling, Linköpings universitet |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Linköping Studies in Science and Technology. Thesis, 0280-7971 ; 1325 |
Page generated in 0.003 seconds