Movement of a bridge superstructure during a seismic event can result in damage to the bridge or even collapse of the span. An incapacitated bridge is a life-safety issue due directly to the damaged bridge and the possible loss of a life-line. A lost bridge can be expensive to repair at a time when a region's resources are most strained and a compromised commercial route could result in losses to the regional economy. This thesis investigates the use of Snapping-Cable Energy Dissipators (SCEDs) to restrain a simply supported single span bridge subjected to three-dimensional seismic loads. SCEDs are synthetic fiber ropes that undergo a slack to taut transition when loaded.
Finite element models of six simply supported spans were developed in the commercial finite element program ABAQUS. Two seismic records of the 1940 Imperial Valley and 1994 Northridge earthquakes were scaled to 0.7g PGA and applied at the boundaries of the structure. The SCEDs were modeled as nonlinear springs with an initial slackness of 12.7mm. Comparisons of analyses without SCEDs were made to determine how one-dimensional, axial ground motion and three-dimensional ground motion affect bridge response. Analysis were then run to determine the effectiveness of the SCEDs at restraining bridge motion during strong ground motion. The SCEDs were found to be effective at restraining the spans during strong three-dimensional ground motion. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/34051 |
| Date | 05 August 2005 |
| Creators | Taylor, Robert Paul |
| Contributors | Civil Engineering, Plaut, Raymond H., Cousins, Thomas E., Roberts-Wollmann, Carin L. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | Thesis.pdf |
Page generated in 0.0027 seconds