This thesis deals with the issue of hydrostatic bearings. The aim was to design a test rig for an axial hydrostatic bearing. The axial hydrostatic bearing was calculated and designed with respect to the function of the tester. The construction of the test equipment was further supported by calculations of the main parts together with FEM analyses. The design was also accompanied by an introduction to the hydraulic parts of the hydrostatic bearing, which took place in consultation with Bosch Rexroth. The aim of the work, the design of a test device in a scale of 1:10, was completed. The following results from hydrostatic bearing tests will allow the introduction of new procedures in the production of turntables mounted on a hydrostatic bearing. Examination of operating conditions and permissible assembly inaccuracies will make it possible to reduce the production requirements for bearing mounting.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444275 |
| Date | January 2021 |
| Creators | Foltýn, Jan |
| Contributors | Robenek, Dětřich, Svoboda, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0054 seconds