The aim of this work was to design test bend for vehicle air-conditioning. This test bend should simulate interior of the car and the engine compartment. Electric motor is used to drive compressor in test bend. Air supplied to test bend is modified to extreme conditions and the volume of supplied air is the same as the car drove at 50 km/h. Main frame of test bend is made from aluminium profiles manufactured by Bosch Rexroth, which provides great modularity. Walls are made from insulated panels by ELCOM System, they have very good insulation and are strong so additional equipment can be installed inside. Construction design was made is SolidWorks with 3D models of test bend as output. Air-conditong parts which were used as samples are originally from Skoda Octavia II. For this vehicle were made calculations of heat loads. In conclusion is simple testing example for this test bend and although there are some examples for future measuring.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230981 |
| Date | January 2013 |
| Creators | Andrýs, Jan |
| Contributors | Hejčík, Jiří, Štětina, Josef |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds