This thesis presents the research and development behind the integration of an autonomous propulsion system for a four-wheeled Ground Penetrating Radar (GPR) measurement unit, previously requiring manual operation. In order to ease the administration of the complex new system, Robot Operating System (ROS) 2 was used as middleware, where an implementation of Light Detection And Ranging (LiDAR) 3D-SLAM (Simultaneous Localization And Mapping) served to secure precise localization of the Unmanned Ground Vehicle (UGV) and mapping of its environment. This, with the ultimate goal of enabling accurate survey execution along paths optimized for various dynamic indoor- and outdoor environments. From a more general point of view, this work can also act as a hardware- and software selection guide for similar projects, especially if stricter physical limitations apply and the autonomous system is not considered the primary system, but the majority of the internal enclosed space of the UGV is reserved for higher purpose equipment or storage requirements. In this first prototype iteration, the mapping accuracy of the autonomous system reached centimeter precision and the execution of surveys in grid- and spiral patterns yielded position accuracies of 5(2) cm and 6(4) cm, respectively. These results are indeed very promising and show the proof of concept needed to enter the next development phase.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-197643 |
| Date | January 2022 |
| Creators | Wall Eskilsson, Fredrik |
| Publisher | Umeå universitet, Institutionen för fysik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds