M. Tech. (Department of Mechanical Engineering, Faculty of Engineering and Technology), Vaal University of Technology. / Fault diagnosis of a rotor system operating in a fluid is one of the most difficult aspects
of rotating machinery. Fluid in machinery plays a significant role in concealing the
allowable rubbing stress limit during the impact generated from the rotor-stator rub which
may progressively deteriorate the rotating system. Therefore, a numerical and
experimental investigation was performed to analyse the influence of the fluid during the
rotor-stator contact of a vertical rotor system partially submerged in an incompressible
inviscid fluid with a focus on detecting rubbing fault in the presence of axial load. The
theoretical model of lateral-torsional rotor consists of a 3-D rub-impact induced
parametric excitation, which was assimilated to operate as elastic vertical rotor system by
considering the transient vibration of a flexible axial force and energy of the vertical shaft
system. The model was established based on Jeffcott rotor, time-varying stiffness and the
rotor-stator fluid interaction. The Lagrangian principle was used to establish the
governing equation of motion. The hydrodynamic forces acting on the vertical rotor were
established and introduced into the system based on the Laplace form of the linearized
Navier–Stokes equations under lateral excitation yielding a highly nonlinear 5-DOF
system. To evaluate the dynamic response and ensure the accurate acquisition of rubbing
features in a fluid, the classical Fast Fourier Transform (FFT) and the vibration waveform
have been discretised and illustrated through the frequency components. Furthermore, for
effective extraction of some hidden features of rub, the nonlinear features embedded in
the vibration waveform have been discretised and illustrated through to the lateral
deformation of the rotor and the orbit patterns of the shaft. Qualitative numerical analysis
suitable for highly nonlinear and non-stationary signal Time-Frequency strategies,
Wavelet Synchrosqueezed Transform (WSST) and Instantaneous Frequency (IF)
technique were employed to successfully extract the frequency of oscillating modes and
the periodic frequency response of the faulted rotor system. It is demonstrated that the
coupled lateral-torsional vibration of the submerged vertical rotor system has the
potential to enhance the much-unwanted hidden frequencies of vibration that leads to
significant instability of the rotor system. In particular, the responses revealed the
existence of unstable regimes with respect to the lateral-torsional deflection as well as the
angular velocity. High harmonic peaks were also identified at the critical speed, which
can be considered as a monitoring index to detect the rubbing in rotating shafts in a fluid.
It was found that even at relatively slow rotating speed fluid elastic forces induced by the co-rotating flow surrounding the shaft significantly affect the transverse natural modes of
vibration of the shaft. Despite the interaction between the fluid and the rotor generates
self-excitation of low frequencies, obtained results indicated that the fluid-rotor
interaction reduces the dynamic vibration response of the faulted system running below
the second critical speed. It has been analytically demonstrated that the time-varying
stiffness induced is the principal cause of the frequency-modification feature of the
dynamic response of an unbalance-rub rotor system at the contact region. The model
investigated in this study has potential application for drill string-borehole shaft system
used in the oil industry.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:vut/oai:digiresearch.vut.ac.za:10352/650 |
| Date | 21 January 2020 |
| Creators | Sozinando, Desejo Filipeson |
| Contributors | Alugongo, A. A., Pof., Tchomeni, B. X. |
| Publisher | Vaal University of Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds