The main objective of this dissertation is an operational planning optimization with greater concentration on customers and their requirements, which are supposed to be fulfilled in time, costs and quality. The aim is an operative management analysis of production process. In terms of this analysis, deficiencies of the present condition will emerge, which should be eliminated by the solution. The analysis will be based on production system, economy of production process and product. At the deficiencies, which result from the analysis, some variants how to solve the problem will be suggested and finally, the most suitable variant will be chosen. Bending and its contemporary method of solving seems to be the most serious deficiency. Therefore, the panel bender was chosen as the most suitable solution because it is usually the most convenient compensation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228169 |
Date | January 2008 |
Creators | Pistulka, Libor |
Contributors | Havel, Radek, Jurová, Marie |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds