<p>The demands for ride comfort quality in today's long haulage trucks are constantly growing. A part of the ride comfort problems are represented by internal vibrations caused by rotating mechanical parts. This thesis work focus on the vibrations generated from radial runout on the wheels. These long haulage trucks travel long distances on smooth highways, with a constant speed of 90 km/h resulting in a 7 Hz oscillation. This frequency creates vibrations in the cab, which can be found annoying. To help out with the vibration diagnosis when a truck enters a mechanical workshop, this work studies methods for radial runout detection using the wheel speed sensors.</p><p>The main idea is to represent the varying radius signal with a sinusoid, where the calculations are based on Fourier series. The estimated radial runout value is then the amplitude of the sinusoid. In addition to the detection part, the work also present results regarding how the relative phase difference between two wheels with radial runout effects the lateral motion of the cab.</p><p>This thesis work was performed at Scania CV AB in Södertälje, Sweden and all measurements have been full scale experiments on real trucks.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-8744 |
| Date | January 2007 |
| Creators | Nilsson, Martin |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0016 seconds