Return to search

Estimation of Runway Throughput with Reduced Wake Vortex Separation, Technical Buffer and Runway Occupancy Time Considerations

This thesis evaluates the potential recovery of the runway throughput under Wake Turbulence Re-categorization (RECAT) Phase II and Time-based Separation (TBS) with a Runway Occupancy Time (ROT) constraint comparing with RECAT Phase I. This research uses aircraft performance parameters (runway occupancy time, approach speed, etc.) from the Airport Surface Detection Equipment, Model X (ASDE-X) data set. The analysis uses a modified version of the Quick Response Runway Capacity Model (RUNSIM). The main contributions of the study are: 1) identifying the technical buffer between in-trail arrivals and regenerate them in RUNSIM; 2) estimate the percentage of the arrival pairs that have wake mitigation separation times in excess of ROT; 3) developed an additional in-trail arrival separation rule based on ROT; 4) measure the risk of potential go-arounds with and without the additional 95 ROT separation rules. 5) generate a sample equivalent time-based RECAT II.

The study results show that the distributions of technical buffers have significant differences for different in-trail groups and strong connectivity to airport elevations. This is critical to estimate runway capacities and safety issues especially when advanced wake mitigation separation rules are applied. Also, with decreasing of wake separations, ROT will become a limiting factor in runway throughput in the future. This study shows that by considering a 95 percentile ROT constrain, one single runway can still obtain 4 or 5 more arrivals per hour under RECAT II but keep the same level of potential go-arounds compared with current operation rules (RECAT I). TBS rules seem to benefit more under strong wind conditions compared to RECAT I, and RECAT II. TBS rules need to be tailored to every airport. / Master of Science / This thesis evaluates the potential recovery of the runway throughputs by re-defining the minimum distance or time separations between successive arrivals. The minimum separation criteria between in-trail arrivals is defined by Federal Aviation Administration to avoid the wake vortex influence produced by the leading aircraft. The main contribution of this thesis lies in estimation of throughput capacity with the reduced minimum separation between arrivals.

The study results show that the distributions of buffers added to the minimum separations have significant differences for different in-trail groups and strong connectivity to airport elevations. This is critical to estimate runway capacities and safety issues especially when advanced wake mitigation separation rules are applied. Also, with decreasing of wake separations, runway occupancy time will become a limiting factor in runway throughput in the future. This study shows that by considering a 95 percentile ROT constrain, one single runway can still obtain 4 or 5 more arrivals per hour under reduced minimum separation but keep the same level of potential go-arounds compared with current operation rules.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/85047
Date18 September 2018
CreatorsHu, Junqi
ContributorsCivil and Environmental Engineering, Trani, Antonio A., Abbas, Montasir M., Hotle, Susan
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0019 seconds