Return to search

Stanovení obsahu benzo(a)pyrénu v uzených masných výrobcích s využitím moderních izolačních technik / Determination of benzo(a)pyrene content in smoked meat products using modern isolation techniques

In this work a new simplified procedure for isolation and determination of PAH in smoked meat products was developed. This procedure is using ASE as selective extraction technique. Its principle is addition of silicagel activated during 18 hours at 140 °C directly to the extraction cell in ratio 10 g to 1 g of homogenized sample. In the next step the sample is extracted by n-hexane at 100 °C and 10 MPa for three 10 minutes static extraction cycles. The flush volume is 60 % and the purge time 120 sec. During the extraction silicagel adsorb koextracted lipids and thus the obtained extract is suitable for immediate HPLC-FLD analysis. On the contrary, the classical extraction procedures with nonpolar solvent require difficult purification of extract for removal of unwanted lipids. Mostly applied techniques here are GPC and SPE. The new procedure was validated for determination of B[a]P as well as for determination of 4 PAH (B[a]A, CHR, B[b]F, B[a]P) in smoked sausages. It meets all requirements to be set by Regulation (EC) No 333/2007, respective by new Regulation (EC) No 836/2011. After the method validation, the content of 4 PAH was investigated in twelve samples of various smoked sausages manufactured in Slovakia. Two analyzed products showed high PAH levels exceeding maximum legislation limits set for B[a]P as well as for sum of 4 PAH by Regulation (EC) No 835/2011.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216927
Date January 2013
CreatorsSuranová, Mária
ContributorsŠimon, Peter, Šimko, Peter
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0015 seconds