Return to search

Simulation of Indoor Radon and Energy Recovery Ventilation Systems in Residential Buildings

This study aims to investigate the effects of ventilation rate, indoor air temperature, humidity and using a heat recovery ventilation system on indoor radon concentration and distribution. Methods employed include energy dynamic and computational fluid dynamics simulation, experimental measurement and analytical investigations. Experimental investigations primarily utilize a continuous radon meter and a detached house equipped with a recovery heat exchanger unit. The results of the dynamic simulation show that the heat recovery unit is cost-effective for the cold Swedish climate and an energy saving of about 30 kWh per  floor area per year is possible, while it can be also used to lower radon level. The numerical results showed that ventilation rate and ventilation location have significant impacts on both radon content and distribution, whereas indoor air temperature only has a small effect on radon level and distribution and humidity has no impact on radon level but has a small impact on its distribution.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-29274
Date January 2015
CreatorsAkbari, Keramatollah
PublisherMälardalens högskola, Framtidens energi, Sweden : Mälardalen University
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, monograph, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationMälardalen University Press Dissertations, 1651-4238 ; 190

Page generated in 0.0024 seconds