Yes / In recent years 3D printing has gained popularity amongst industry professionals and hobbyists alike, with many new types of Fused Filament Fabrication (FFF) apparatus types becoming available on the market. A massively overlooked component of FFF is the requirement for a simple method to calculate the geometries of polymer depositions extruded during the FFF process. Manufacturers have so far achieved adequate methods to calculate tool-paths through so called slicer software packages which calculate the required velocities of extrusion from prior knowledge and data. Presented here is a method for obtaining a series of equations for predicting height, width and cross-sectional area values for given processing parameters within the FFF process for initial laydown on to a glass surface.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/16895 |
| Date | 23 February 2019 |
| Creators | Hebda, Michael J., McIlroy, C., Whiteside, Benjamin R., Caton-Rose, Philip D., Coates, Philip D. |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | © 2019 Elsevier B.V. All rights reserved. Reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license. |
Page generated in 0.0017 seconds