Nature develops several materials with remarkable functional properties composed of comparatively simple base substances. Biological materials are often composites, which optime the conformation to their function. On the other hand, synthetic materials are designed a priori, structuring them according to the performance to
be achieved. 3D printing manufacturing is the most direct method for specific component production and earmarks the sample with material and geometry designed ad-hoc for a defined purpose, starting from a biomimetic approach to functional structures. The technique has the advantage of being quick, accurate, and with a limited waste of materials. The sample printing occurs through the deposition of material layer by layer. Furthermore, the material is often a composite, which matches the characteristics of components with different geometry and properties, achieving better mechanical and physical performances. This thesis analyses the mechanics of natural and
custom-made composites: the spider body and the manufacturing of metallic and non-metallic graphene composites. The spider body is investigated in different sections of the exoskeleton and specifically the fangs. The study involves the mechanical characterization of the single components by the nanoindentation technique, with a special focus on the hardness and Young's modulus. The experimental results were mapped, purposing to present an accurate comparison of the mechanical properties of the spider body. The different stiffness of components is due to the tuning of the same basic material (the cuticle, i.e. mainly composed of chitin) for achieving different mechanical functions, which have improved the animal adaptation to specific evolutive requirements. The synthetic composites, suitable for 3D printing fabrication, are metallic and non-metallic matrices combined with carbon-based fillers. Non-metallic graphene composites are multiscale compounds. Specifically, the material is a blend of acrylonitrile-butadiene-styrene (ABS) matrix and different percentages of micro-carbon fibers (MCF). In the second step, nanoscale filler of carbon nanotubes (CNT) or graphene nanoplatelets (GNP) are added to the base mixture. The production process of composite materials followed a specific protocol for the optimal procedure and the machine parameters, as also foreseen in the literature. This method allowed the control over the percentages of the different materials to be adopted and ensured a homogeneous distribution of fillers in the plastic matrix. Multiscale compounds provide the basic materials for the extrusion of fused filaments, suitable for 3D printing of the samples. The composites were tested in the
configuration of compression moulded sheets, as reference tests, and also in the corresponding 3D printed specimens. The addition of the micro-filler inside the ABS matrix caused a notable increment in stiffness and a slight increase in strength, with a significant reduction in deformation at the break. Concurrently, the addition of nanofillers
was very effective in improving electrical conductivity compared to pure ABS and micro-composites, even at the lowest filler content. Composites with GNP as a nano-filler had a good impact on the stiffness of the materials, while the electrical conductivity of the
composites is favoured by the presence of CNTs. Moreover, the extrusion of the filament and the print of fused filament fabrication led to the creation of voids within the structure, causing a significant loss of mechanical properties and a slight improvement in the electrical conductivity of the multiscale moulded composites. The final aim of this work is the identification of 3D-printed multiscale composites capable of the best matching of mechanical and electrical properties among the different compounds proposed. Since structures with metallic matrix and high mechanical performances are suitable for aerospace and automotive industry applications, metallic graphene composites are studied in the additive manufacturing sector. A comprehensive study of the mechanical and electrical properties of an innovative copper-graphene oxide composite (Cu-GO) was developed in collaboration with Fondazione E. Amaldi, in Rome. An extensive survey campaign on the working conditions was developed, leading to the definition of an optimal protocol of printing parameters for obtaining the samples with the highest density. The composite powders were prepared following two different routes to disperse the nanofiller into Cu matrix and, afterward, were processed by selective laser melting (SLM) technique. Analyses of the morphology, macroscopic and microscopic structure, and degree of oxidation of the printed samples were performed. Samples prepared followed the mechanical mixing procedure showed a better response to the 3D printing process in all tests. The mechanical characterization has instead provided a clear increase in the resistance of the material prepared with the ultrasonicated bath method, despite the greater porosity of specimens. The interesting comparison obtained between samples from different routes highlights the influence of powder preparation and working conditions on the printing results. We hope that the research could be useful to investigate in detail the potential applications suitable for composites in different technological fields and stimulate further comparative analysis.
| Identifer | oai:union.ndltd.org:unitn.it/oai:iris.unitn.it:11572/355324 |
| Date | 24 October 2022 |
| Creators | Residori, Sara |
| Contributors | Residori, Sara, Pugno, Nicola |
| Publisher | Università degli studi di Trento, place:TRENTO |
| Source Sets | Università di Trento |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/embargoedAccess |
| Relation | firstpage:1, lastpage:189, numberofpages:189 |
Page generated in 0.0027 seconds