The thesis deals with the processing of pure iron by Selective laser melting technology as a material with good electromagnetic properties. The main area is the optimization of the production of thin-walled samples, which monitor the influence of process parameters on the thickness and quality of the wall surfaces. In addition to the perpendicular walls, walls built at an angle of 45° are also examined. Another phase of the thesis is the determination of process parameters for bulk bodies to achieve the lowest porosity and high surface quality. An important part of the research is the application of acquired knowledge in the production of samples designed to test magnetic properties as well as part for a specific application. These considerations concern not only the setting of the printing parameters, but also the heat treatment and its influence on the magnetic and mechanical properties of the material. Mechanical properties were determined by tensile tests and hardness tests. All samples were made on a SLM 280HL using a 400W ytterbium laser.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379042 |
| Date | January 2018 |
| Creators | Šreibr, Vít |
| Contributors | Dočekalová, Kateřina, Paloušek, David |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds