This thesis deals with the study of UV-photochemical generation of volatile compounds (UV-PVG) in connection with atomic absorption spectrometry (AAS). Selenium (Se(IV)) was selected as a model analyte and many experiments were carried out to expand the current sum of knowledge of the topic. The study was commenced by assembling the UV-PVG apparatus in the continuous flow mode. The detection method used was AAS with externally heated quartz furnace atomizer. The focus of the first step of the study was on the construction of the volatile compounds generator (UV-photoreactor) with emphasis on the material used; tubes made of teflon or quartz of different diameters were tested. The construction of the apparatus was followed by optimization of the reaction conditions (the type and concentration of the photochemical agent and other agents, which increase the analytical signal; the carrier gas and the auxiliary hydrogen gas flow rate; the sample flow rate). Eventually, the analytical figures of merit of the selenium determination using the proposed method were found. The results showed that teflon reaction tubes are a good competitor to those made of quartz. The accuracy of the method has been successfully verified by analysis of certified reference material and its applicability has been further tested...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:353427 |
| Date | January 2016 |
| Creators | Rybínová, Marcela |
| Contributors | Rychlovský, Petr, Komárek, Josef, Šíma, Jan |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds