This thesis proposes that a baggage handling system (BHS) environment can be defined and coupled to a whole life cycle cost (WLCC NPV) model. The results from specific experiments using the model can be used as the basis by which to commercially compare BHS flight build types of any capacity, and BHS geographical location.
The model examined the three flight build types(i): Fully automatic build2; (ii) Semi-automatic build, and(iii); Manual build.
The model has the ability to calculate a bag flow busy hour rate, and to replicate the baggage flow characteristics observed within real BHS operations. Whole life cycle costs (WLCC NPV) results are produced, and these form the basis by which the comparison of BHS types is made. An overall WLCC NPV scatter diagram was produced, which is a summation of each of the test sensitivities. The assumptions and limitations of the analysis are provided. It is proposed that the results, conclusions and recommendations shall be of value to airports, airlines, and design consultants.
| Identifer | oai:union.ndltd.org:CRANFIELD1/oai:dspace.lib.cranfield.ac.uk:1826/9311 |
| Date | 05 1900 |
| Creators | Bradley, Alexandre |
| Contributors | Pagliari, R., Moxon, Richard |
| Publisher | Cranfield University |
| Source Sets | CRANFIELD1 |
| Language | English |
| Detected Language | English |
| Type | Thesis or dissertation, Doctoral, PhD |
| Rights | © Cranfield University 2013. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner. |
Page generated in 0.0025 seconds