This thesis is deals with the suitability of Ag-Sn-Sb alloy for extrusion and selection of suitable materiál for the extruder nozzle. The theoretical part of this thesis deals with the general possibilities of 3D metal printing, especially the metal printing in the semi-solid phase and with it‘s problems. The experimental part describes the development of semi-solid alloys testing device and the research od the alloy and its interactions with solid materials in mutual motion. Analyzis of mechanical and chemical influence between alloy and solid material were performed by visual investigation and analysis of elements by EDS detector. The results of these analyzes led to the choise of nozzle material suitable for extrusion of Ag-Sn-Sb alloy.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442481 |
| Date | January 2019 |
| Creators | Klepárníková, Eliška |
| Contributors | Řehořek, Lukáš, Jan, Vít |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds