Return to search

Miniaturisation of pH holographic sensors for nano-bioreactors

Monitoring and controlling pH is of utmost importance in bioprocessing as it directly affects product yield and quality. Multiplexed experiments can be performed in nanobioreactors for optimisation of yield and cell heterogeneity in a relatively quick and inexpensive manner. In this thesis, a pH holographic sensor (holosensor) is miniaturised to 3.11 nL in volume and integrated into a PDMS-glass microfluidic chip for monitoring the growth of Lactobacillus casei Shirota. Although other established methods for monitoring cell cultures can be utilised, miniaturised holosensors enable real-time and non-consumptive monitoring of the bacterial cell culture growth medium. The 2-hydroxyethylmethacrylate (HEMA)-co-2-(trifluoromethyl) propenoic acid (TFMPA) holosensor was fabricated using an adapted technique from photolithography, coupled with the use of a polymerisation inhibitor to control the gel polymerisation with diameters not exceeding a standard deviation of 0.067. The hologram brightness was optimised to 1.05 ms integration time with 36X magnification using a low power (0.290 mW) 532 nm green continuous wave (CW) laser with a devised beam-offset technique. The holosensor was characterised with ionic strength balanced (9.50 mS/cm) McIIvaine pH buffers and a calibration curve plotted together with measured ionic strength, optical density at 600 nm (OD600) and pH. Correspondingly, RGB-xyY transformed values were plotted in the CIE 1931 chromaticity diagram. Later, a miniaturised 0.4φ HEMA-co-TFMPA holosensor and array was also demonstrated. Together with the 3.0φ holosensor, an accuracy parameter for the 0.4φ spot and array holosensors were calculated to be 99.08%, 99.38% and 97.77% respectively. Further work involved studying the issues associated with fabricating gels with unusually flat gel profiles. Other preliminary results suggested the alternative of utilising polymers as a holosensor substrate, together with a dye-free method for hologram fabrication, outlined the prospective possibility of a miniaturised holosensor integrated into a polymer microfluidic chip with the flexibility of hologram colour customisation for cell culture monitoring.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:744254
Date January 2017
CreatorsChan, Leon Cong Zhi
ContributorsLowe, Christopher R.
PublisherUniversity of Cambridge
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttps://www.repository.cam.ac.uk/handle/1810/268167

Page generated in 0.0019 seconds