The diplomma thesis is dealing with possibilities of Signal to noise ratio measurement by method, which is based on direct measurement. It is chosen the most suitable method – signal and noise separation to two different parallel signal branches, where is measured signal strength in one branch and root mean square value in the other. The thesis is consisted of a concept of detail block scheme of Signal to noise ratio meter, which was designed in terms of theoretical knowledge. Particular functional blocks were circuit-designed, the active and passive parts were chosen and their function were described. There were made simulation and displayed input and output time flows. There is designed the whole connection of engineered Signal to noise ratio meter in the last part of my thesis. The double-sided board of printed circuit is contained too. It was created simple programme for supervisor micro-processor. Thereby were constructed complete bases for realization.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217681 |
| Date | January 2008 |
| Creators | Šimoník, Petr |
| Contributors | Frýza, Tomáš, Říčný, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0146 seconds