Return to search

Design Of A New Equipment For Sesame Seed Dehulling

In this study, new methods and processing equipments for sesame dehulling were investigated.

First, water absorption of sesame seed was studied at 20, 30, and 40&deg / C. The data could be modeled using Peleg equation where it was found that the constant k1 was inversely related to temperature but the effect of temperature on k2 was negligible.

In the second phase of the work a lab scale continuous screw conveyor as dehuller and two equipments, (1) fluidized bed dryer and (2) hull separator to function as agitator, dryer and separator, for hull separation were designed. Fluidized bed unit was unsuccessful as it caused rapid drying of seeds before hulls can be removed.

Using designed dehuller and hull separator, seeds at 30.5, 50.4 and 70.7 % db moisture contents were processed at dehuller speeds of 420, 840, and 1150 rpm. It was found that the percentage of dehulled seeds was linearly dependent on moisture content, optimal speed of designed dehuller was 840 rpm, and results for the efficiency of dehulling the seeds were significantly the same at 420 and 1150 rpm. Repeated passes of seeds through dehuller not only increased the efficiency of dehulling but also the percentage of damaged seeds. A dehulling efficiency of about 92.5 % was attained after four passes.

The possibility of soaking seeds in an enzyme solution before dehulling was also investigated. By this means, after soaking in 0.2 % (v/v) Peelzyme-I solution for 15 min, a dehulling efficiency of 95 % was achieved.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/2/678/index.pdf
Date01 January 2004
CreatorsGungor, Ugras
ContributorsEsin, Ali
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.0019 seconds