Return to search

Implementation of a Serial Communication Interface for a Signal Processor

<p>The purpose of this thesis was to implement a serial communication port model for a digital signal processor. It is a behavioral model, developed using VHDL, that is instruction comparisable to the Motorola digital signal processor DSP 56002. It supports five different data transfer modes and provides a programmable baud rate generator. </p><p>This report starts out by giving a description of the external port, port C, the pin control logic and general purpose functionality. Then a more detailed description of the three pin dedicated serial communication interface is presented, the different operating modes and the baud rate generator are described.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-2029
Date January 2003
CreatorsEriksson, Jens, Nilsson, Kristian
PublisherLinköping University, Department of Electrical Engineering, Linköping University, Department of Electrical Engineering, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text
RelationLiTH-ISY-Ex-ET, ; 272

Page generated in 0.0017 seconds