Title: Physical properties of ultrafine-grained magnesium based alloys prepared by various severe plastic deformation techniques Author: Jitka Stráská Department / Institute: Department of Physics of Materials Supervisor of the doctoral thesis: Doc. RNDr. Miloš Janeček, CSc. Abstract: The objective of the doctoral thesis is the complex investigation of ultrafine-grained magnesium alloy AZ31 prepared by two different severe plastic deformation techniques, in particular the hot extrusion followed by equal-channel angular pressing (EX-ECAP) and high pressure torsion (HPT). These severe plastic deformation methods, and as well as many others, are described in detail in the introductory theoretical section. Experimental results are summarized in the following experimental part of the thesis. Mechanical properties, lattice defect structure and especially microstructure were investigated using various experimental techniques. Thermal stability of ultrafine-grained microstructure of AZ31 after EX-ECAP was investigated and the activation energies for grain growth in different temperature ranges were calculated using kinetic equation for grain growth and Arrhenius equation. Results from the dislocation density measurements proved temperature ranges of the recovery and the following grain growth. Results from the...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:338107 |
| Date | January 2014 |
| Creators | Stráská, Jitka |
| Contributors | Janeček, Miloš, Dlouhý, Antonín, Kalvoda, Ladislav |
| Source Sets | Czech ETDs |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds