The growing interest in the industrialization of construction process; promotes opportunities for automation. Automation brings improvement in quality and productivity, while reducing worker’s exposure to hazardous work environments. The integration of robotics in interior finishing works, such as sanding and painting of drywalls is a relatively new concept. Progressing to a stage where fully autonomous robots are used for interior finishing works requires intermediate steps; namely surface profiling. This thesis describes a theoretical concept of shadow profilometery to profile the surface of an installed drywall. A shadow was cast over the area under consideration, and the shadow profile was captured as a 2D image by a camera. Digital image processing techniques were utilized for identifying regions that deviate from a flat surface. The methodology discussed in this research, was tested on a virtual system, and the results were found to be encouraging. / Construction Engineering and Management
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/1756 |
| Date | 06 1900 |
| Creators | Alex, Dony Cherian |
| Contributors | Al-Hussein, Mohamed (Civil and Environmental Engineering), Behzadipour, Saeed (Mechanical Engineering), Hashisho, Zaher(Civil and Environmental Engineering), Hahn, Jin-Oh(Mechanical Engineering), Al-Hussein, Mohamed (Civil and Environmental Engineering), Behzadipour, Saeed (Mechanical Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Format | 2554081 bytes, application/pdf |
Page generated in 0.0021 seconds