<p>Void growth and coalescence in a single layer model material with holes were visualized by the environmental electron scanning microscope coupled with in situ tensile test. Single sheet model materials were manufactured with a line of laser drilled holes through thickness. In order to investigate the effect of shear localization, the line of holes were oriented with the misorientation angle <em>θ </em>= 0°, 15°, 30°, and 45°. The α-brass samples were studied to introduce the work hardening effect in comparison with the pure copper samples.</p> <p>By taking images at intervals with small strain increments, the void growth behaviors were visualized during the interrupted tensile testing. The void coalescence (defined consistent with Hosokawa et al (2011), as the point at which the voids stopped shrinking laterally) was successfully captured for the first time in the two dimensional studies. The evolutions of void shape change and void rotation during deformation were also studied quantitatively. The results showed that the higher work hardening behaviors can suppress the void coalescence. It also showed that the effect of local volume fraction dominated the coalescence event rather than the void spacing and shear localization. A comparison of the classic models with the experimental results were also made.</p> / Master of Science in Materials Science and Engineering (MSMSE)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/13474 |
| Date | 10 1900 |
| Creators | Li, Jing |
| Contributors | Wilkinson, David S., Materials Science and Engineering |
| Source Sets | McMaster University |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0049 seconds