In recent years precision measurement of alternating currents goes through large progress especially because of improvements in metrology of electric power, which is related to reduction of electricity consumption. Therefore, more precise measurement of electric energy, power and power quality is required. Measurement range is extending and number of measured frequency points is growing up to 100 kHz. Development of current to voltage transducer with normalized output voltage (0,5 V - 1 V) is in progress because of their easy integration in different measuring systems.. From big area of alternating current metrology this dissertation focuses on development of improved cage shunts for measurement of alternating currents in range 10 mA - 100 A, 10 Hz - 100 kHz. Main objective of this dissertation is to develop theoretical model of existing cage shunts, which will assist design of new improved cage shunts construction. In this dissertation the analytical model of CMI’s cage shunts was established, based on calculating of trans-impedance from cascade matrix of passive two-port which is representing the shunt. Trans-impedance can be used for AC-DC difference and phase error calculation, which are two basic parameters of shunts. Uncertainty analysis of the model was done by means of Monte Carlo method. Next, this dissertation also concentrates on suitable measurement methods of phase error, AC-DC difference, and power a temperature coefficient of resistance. These measurements method were used for calibration of existing CMI’s cage shunts and so the model’s verification was made. Finally, theoretical optimization of existing CMI’s cage shunts constructions and theoretical designs of 20A, 50A and 100A shunts were done using sensitivity analysis results.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233597 |
| Date | January 2013 |
| Creators | Nováková Zachovalová, Věra |
| Contributors | Vrabček,, Peter, Draxler,, Karel, Beneš, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds