Cardiologists can gain useful insight into a patient's condition when they are able to correlate the patent's symptoms and activities. For this purpose, a Holter Monitor is often used - a portable electrocardiogram (ECG) recorder worn by the patient for a period of 24-72 hours. Preferably, the monitor is not cumbersome to the patient and thus it should be designed to be as small and light as possible; however, the storage requirements for such a long signal are very large and can significantly increase the recorder's size and cost, and so signal compression is often employed. At the same time, the decompressed signal must contain enough detail for the cardiologist to be able to identify irregularities. "Lossy" compressors may obscure such details, where a "lossless" compressor preserves the signal exactly as captured.<p>The purpose of this thesis is to develop a platform upon which a Holter Monitor can be built, including a hardware-assisted lossless compression method in order to avoid the signal quality penalties of a lossy algorithm. <p>The objective of this thesis is to develop and implement a low-complexity lossless ECG encoding algorithm capable of at least a 2:1 compression ratio in an embedded system for use in a Holter Monitor. <p>Different lossless compression techniques were evaluated in terms of coding efficiency as well as suitability for ECG waveform application, random access within the signal and complexity of the decoding operation. For the reduction of the physical circuit size, a System On a Programmable Chip (SOPC) design was utilized. <p>A coder based on a library of linear predictors and Rice coding was chosen and found to give a compression ratio of at least 2:1 and as high as 3:1 on real-world signals tested while having a low decoder complexity and fast random access to arbitrary parts of the signal. In the hardware-assisted implementation, the speed of encoding was a factor of between four and five faster than a software encoder running on the same CPU while allowing the CPU to perform other tasks during the encoding process.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-04082007-090354 |
| Date | 11 April 2007 |
| Creators | Ottley, Adam Carl |
| Contributors | Dolovich, Allan T., Dinh, Anh van, Daku, Brian L., Bolton, Ronald J., Saadat Mehr, Aryan |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-04082007-090354/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0023 seconds