Return to search

Transformační návrhová metoda filtrů vycházející z pasivních struktur / Transform-based filter design technique based on passive structures

This diploma thesis deals with transformation of passive elements in filter structures onto substitutes with new active element CFTA. A basic characteristic, types of filters, their frequency characteristics and a form of transfer functions are listed in an introduction. After it is introduced a development of signal flow graphs, single type of graphs and their modifications. There is specified the method Mason-Coates graphs which proves as optimal for analysis circuits. There are listed rules for a correct evaluation and make-up the graphs. Further are described active elements CFTA, CDTA and a current conveyor. There are defined active substitutes to a floating and grounded inductance, a floating capacitor and also a floating and grounded resistor in this thesis. Here, there are also designed substitutes to parallel combinations of floating passive elements. All substitutes use CFTA as an active element and the grounded capacitor as a passive element of substitute. There are presented forms of M-C graphs, transfer functions and equations for calculation passive elements of substitute at created equivalents. Functionality of designed substitutes is always verified on second order passive filters by the help of a PC simulation. There are tabular listed defined equivalents with corresponding signal graphs, transfer functions and equations for calculation capacitor of substitute are here tabular listed too. In this work there are defined two ways of connecting defined substitutes within the scope of one circuit that can be used as a simple connection or integration bounded elements. In the case of usage of the integration bounded elements it is possible to reduce total number used active elements. The usage defined substitutions are verified by way of both methods on known higher order passive frequency filter structures. Third order low pass filter is here realized and scaled in frequency scope from 100 Hz to 100 MHz.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218095
Date January 2009
CreatorsVenclovský, Martin
ContributorsKoton, Jaroslav, Herencsár, Norbert
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0028 seconds