This thesis compares the properties of four types of replaceable cutting tool inserts from different suppliers during milling. The comparative factors are cutting force, material loss of the insert and the roughness of the resulting surface. The thesis is divided into two parts - a comprehensive overview of the current state of knowledge and an experiment. The first part analyzes the load, the possibility of its measurement, surface treatment of tools, milling cutters and replaceable inserts. The experiment took the form of measuring the load during face milling, measuring the surface roughness of the machined material and measuring the material loss of the inserts on an optical strain gauge. The replaceable cutting tool inserts were compared based on the performed measurements.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:432700 |
| Date | January 2020 |
| Creators | Podstata, Jan |
| Contributors | Jaroš, Aleš, Fiala, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds