Diploma thesis on Machining hardened steels is focused on the analysis of longitudinal turning of hardened steel 14 109 by using a tool from PKNB in terms of measuring the force load using a dynamometer and then evaluating the surface quality. The theoretical part deals with the issue of turning technology, cutting materials and heat treatment of steel. In the practical part, the influence of cutting conditions on the resulting values was assessed during the experiment. Twelve samples with different combinations of cutting conditions were tested, then was selected a sample that met the criterion of combining minimum cutting forces values and surface quality. The experiment shows that force load values can be achieved twice less by combining cutting conditions with an appropriate combination.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443236 |
| Date | January 2021 |
| Creators | Veselý, Ondřej |
| Contributors | Osička, Karel, Jaroš, Aleš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.003 seconds