In this thesis is described machining of barrel steels and determination of the most suitable cutting conditions for this process. In the theoretical part was characterized cutting process and explained problems of VBD wear, chip formation and roughness of the surface. There were also explained most common cutting materials and in the last part were described CVD and PVD coating methods. In the experimental part was measured force load during turning. There was also tested eight carbide cutting inserts from SECO TOOLS. During the tests were measured additional surface roughness values and taken chip samples as well. From the evaluated load force data were determined optimized cutting conditions for machining barrel steels and most suitable type of cutting insert.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378854 |
| Date | January 2018 |
| Creators | Beneš, Ondřej |
| Contributors | Fiala, Zdeněk, Jaroš, Aleš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds