This master’s thesis deals with the design of a robotic cell for the automation of woodworking machine tending. The task of the robot is to manipulate with the specified laminated chipboards of various sizes, before and after machining. The boards are brought to the cell on pallets in three possible placement variants. After a brief research part, conceptual designs of cell layout were created. The optimal and further elaborated design came as a result of selected evaluation criteria. The next part of the thesis consists of designs and selection processes of individual components. These were later used to create a simulation model in Tecnomatix Process Simulate software (Siemens), that helped to verify the functionality of the cell layout, design the control logic and acquire the time of the manipulation cycle used for informative calculation of annual production. In the end, the final design was evaluated from an economic point of view with an emphasis on the return of the initial investment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443246 |
| Date | January 2021 |
| Creators | Závodský, Martin |
| Contributors | Kubela, Tomáš, Pochylý, Aleš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds