The main idea is focused on the diagnostics of a specific hydraulic system, i.e. sensing the physical quantities of the hydraulic circuit with a tank and a centrifugal pump driven by an asynchronous motor. It is a system of pipes connected to the pump, where due to its work it creates a water flow and a pressure increase. In practice, this issue is also addressed in the energy and nuclear industries. Primary circuits in some cases cannot be designed or modified to be able measure locally the pressure value. It is necessary to measure this quantity indirectly - from the motor currents. The main idea of the work is to diagnose the system by an indirect method - specifically to detect the state of the hydraulic circuit (pressure, flow) from the values that we are able to measure and detect damage in advance. In the second part of the thesis is the application of the parts of a specific hydraulic system in the simulation environment MATLAB Simulink. The model of the hydraulic circuit contains mathematical-physical relations that simulate the course of the mentioned experiment. The results of the simulation are compared with the results of the experiment. The model also investigates the simulation of a fault condition, when we supply pressure pulsations to the hydraulic circuit. It is these changes in the hydraulic part that affect the characteristics of the pump and the asynchronous motor, so we are able to diagnose this system.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442841 |
Date | January 2021 |
Creators | Kapusta, Juraj |
Contributors | Habán, Vladimír, Huzlík, Rostislav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds