The aim of this master`s thesis was to design a single-cylinder test engine for measuring of the friction forces between the piston group and the cylinder liner. Main engine parameters are based on the common production engine. A floating liner device was chosen for a friction forces measurement. It was necessary to solve an attachment and sealing of the floating liner. Stress-strain analysis of the floating liner has been done. Next step was to re-design a production crankshaft also with a connected balancing devices for single-cylinder engine. Powertrain was seated in a completely new units. Finally the engine was completed and mounted on a stand.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230480 |
| Date | January 2013 |
| Creators | Svoboda, Radovan |
| Contributors | Svída, David, Novotný, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds