The diploma thesis deals with the topic of machinability of materials. The theoretical part describes the aspects according to which machinability can be evaluated. The material side of the thesis is focused on various types of difficult-to-machine materials. The cobalt alloy UmCo50 belongs to the group of difficult-to-machine materials and it is the subject of the experimental part. UmCo50 is an alloy for high temperature use. The primary aim of the thesis was to monitor the wear of the selected cutting tool when turning this alloy. Other aspects of the selected machining process were also monitored, such as force effects or the quality of the machined surface. Despite the fact that machinability of tested materials cannot be expressed in terms of the absolute value of a quantity, it is necessary to compare the various aspects of the machining processes by reference materials. However, certain conditions of this comparison must be met. Based on this, a comparison of tested and reference material was performed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444280 |
| Date | January 2021 |
| Creators | Prno, Peter |
| Contributors | Sedlák, Josef, Zemčík, Oskar |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds