Turkey is one of the most earthquake prone countries in the world. The study area, Erbaa, is located in a seismically active fault zone known as North Anatolian Fault Zone (NAFZ). Erbaa is one of the towns of Tokat located in the Middle Black Sea Region. According to the Earthquake zoning map of Turkey, the study area is in the First Degree Earthquake Zone. The city center of Erbaa (Tokat) was previously settled on the left embankment of Kelkit River. After the disastrous 1942 Niksar-Erbaa earthquake (Mw = 7.2), the settlement was moved southwards. From the period of 1900s, several earthquakes occurred in this region and around Erbaa. The 1942 earthquake is the most destructive earthquake in the center of Erbaa settlement.
In this study, the geological and geotechnical properties of the study area were investigated by detailed site investigations. The Erbaa settlement is located on alluvial and Pliocene deposits. The Pliocene clay, silt, sand, and gravel layers exist in the southern part of Erbaa. Alluvium in Erbaa region consists of gravelly, sandy, silty, and clayey layers. The alluvial deposits are composed of stratified materials of heterogeneous grain sizes, derived from various geological units in the vicinity.
The main objective of this study is to prepare a seismic microzonation map of the study area for urban planning purposes since it is getting more essential to plan new settlements considering safe development strategies after the disastrous earthquakes. In this respect, seismic hazard analyses were performed to deterministically assess the seismic hazard of the study area. Afterwards, the essential ground motions were predicted regarding near fault effects as the study area is settled on an active fault zone. 1-D equivalent linear site response analyses were carried out to evaluate the site effects in the study area. Amplification values obtained from site response analyses reveal that the soil layers in the study area is quite rigid. Furthermore, liquefaction potential and post liquefaction effects including lateral spreading and vertical settlement were also delineated for the study area. The above-mentioned parameters were taken into account in order to prepare a final seismic microzonation map of the study area. The layers were evaluated on the basis of overlay methodologies including Multi-Criteria Decision Analysis (MCDA). Two different MCDA techniques, Simple Additive Weighting (SAW) and Analytical Hierarchical Process (AHP), were carried out in GIS environment. The seismic microzonation maps prepared by SAW and AHP methods are compared to obtain a final seismic microzonation map. Finally, the map derived from the AHP method is proposed to be the final seismic microzonation map of Erbaa.
As an overall conclusion, the northwestern part of the study area where the loose alluvial units exist is found to be vulnerable to earthquake-induced deformations. On the other hand, the Pliocene units in the southern and alluvial units in the northeastern part are quite resistant to earthquake effects. In addition, the proposed final seismic microzonation map should be considered by urban planners and policy makers during urban planning projects in Erbaa.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12611375/index.pdf |
| Date | 01 December 2009 |
| Creators | Akin, Muge |
| Contributors | Topal, Tamer |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | Ph.D. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0019 seconds