Return to search

The effect of voltage dips on wound rotor induction motors used in slip energy recovery drives – implications for converters

Student Number : 0004041J -
MSc dissertation -
School of Electrical and Information Engineering -
Faculty of Engineering / Slip energy recovery (SER) drives are used extensively in industry as they offer cost effective speed control of large wound rotor induction motors. The biggest disadvantage associated with the use of SER drives is the vulnerability of the rotor circuit converters to power system disturbances such as voltage dips. The failure of converters as a result of voltage dips is a problem associated with the use of these particular drives.
The aim of this research is to better understand the stresses on rotor circuit converters as a result of voltage dips at the terminals of the motor. The rotor transients developed by a wound rotor induction motor are investigated for a range of three phase and single phase voltage dips. Simulations conducted in the Alternative Transients Program (ATP) supplement measurements conducted on a simplified SER circuit. The results confirm that voltage dips cause significant stresses on the converters in the rotor circuit. Good correlation was obtained between simulated and measured results. This work allows for a better understanding of the response of wound rotor induction motors to voltage dips and identifies the threat that voltage dips impose on the SER rotor circuit converters.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/1523
Date31 October 2006
CreatorsDavies, Simon Quail
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format1307089 bytes, application/pdf, application/pdf

Page generated in 0.0039 seconds