Many metals used in modern engineering exhibit anisotropy. A common
assumption when modelling anisotropic metals is that the level of anisotropy is
fixed throughout the calculation. As it is well understood that processes such as
cold rolling, forging or shock loading change the level of anisotropy, it is clear
that this assumption is not accurate when dealing with large deformations.
The aim of this project was to develop a tool capable to predict large
deformations of a single crystal or crystalline aggregate of a metal of interest
and able to trace an evolution of anisotropy within the material.
The outcome of this project is a verified computational tool capable of predicting
large deformations in metals. This computational tool is built on the Crystal
Plasticity Finite Element Method (CPFEM). The CPFEM in this project is an
implementation of an existing constitutive model, based on the crystal plasticity
theory (the single crystal strength model), into the framework of the FEA
software DYNA3D® .
Accuracy of the new tool was validated for a large deformation of a single
crystal of an annealed OFHC copper at room temperature. The implementation
was also tested for a large deformation of a polycrystalline aggregate comprised
of 512 crystals of an annealed anisotropic OFHC copper in a uniaxial
compression and tension test. Here sufficient agreement with the experimental
data was not achieved and further investigation was proposed in order to find
out the cause of the discrepancy. Moreover, the behaviour of anisotropic metals
during a large deformation was modelled and it was demonstrated that this tool
is able to trace the evolution of anisotropy.
The main benefit of having this computational tool lies in virtual material testing.
This testing has the advantage over experiments in time and cost expenses.
This tool and its future improvements, which were proposed, will allow studying
evolution of anisotropy in FCC and BCC materials during dynamic finite
deformations, which can lead to current material models improvement.
| Identifer | oai:union.ndltd.org:CRANFIELD1/oai:dspace.lib.cranfield.ac.uk:1826/8435 |
| Date | 03 1900 |
| Creators | Chaloupka, Ondrej |
| Contributors | Campbell, James |
| Publisher | Cranfield University |
| Source Sets | CRANFIELD1 |
| Language | English |
| Detected Language | English |
| Type | Thesis or dissertation, Masters, MSc by Research |
| Rights | © Cranfield University 2013. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner. |
Page generated in 0.0019 seconds