Return to search

Popis residuálních napětí v polymerních trubkách / Description of the residual stresses in polymer pipes

This thesis is dealing with the issue of residual stress present in the wall of a polymer pipe and the influence on its lifetime. Experimental data obtained by the ring slitting method are evaluated and the tangential residual stress in the wall of polypropylene pipe is determined. The evaluation is carried out using a new methodology based on the curved beam theory. The method is verified using numerical simulation. 3D numerical model is used to verify the behavior of the pipe, when there are both tangential and axial residual stresses present in the pipe wall, because the presence of axial stress causes a rise in the magnitude of tangential residual stress. A correction of the tangential stress values corresponding to the pipe length is then proposed. It is shown, that the distribution of the tangential residual stress does not depend significantly on the dimensions or ma-terial of the extruded pipe and a general equation is proposed to describe the distribution. This general distribution is then involved in the calculations of the pipe lifetime that are carried out using a method based on the linear elastic fracture mechanics. A significantly lower lifetimes are obtained when taking the residual stress into account.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231705
Date January 2014
CreatorsPoduška, Jan
ContributorsMajer, Zdeněk, Hutař, Pavel
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0016 seconds