This thesis deals with the cutting of steel thin-walled parts by slitting saw. Its subject is to study and test of cutting edges of slitting saws with a goal to reduce cutting forces to a minimum. The thesis is divided into the theoretical and practical part. In the theoretical part, existing knowledge about slitting saws and general cutting technology is analyzed. In the practical part testing of four slitting saws with different geometries of cutting edges during machining of chosen thin-walled part is performed. The performed measurements show that by the proper choice of the geometry of cutting edge, the cutting force can be reduced approximately by 30 %.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402548 |
| Date | January 2019 |
| Creators | Skryja, Jan |
| Contributors | Sliwková, Petra, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds